Litiiso tsa mochini tsa WMFWT Metal Bellow li nka sebaka sa Burgmann MFLWT80 bakeng sa Mocheso o Phahameng o Sebelisoang Lipompong tsa Oli le Lipompong tsa Lik'hemik'hale.

Tlhaloso e Khutšoanyane:


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

• Bakeng sa li-shafts tse sa hatang
• Tiiso e le 'Ngoe
•E leka-lekana
• E ikemetseng ka tataiso ea ho potoloha
•Melumo ea tšepe e potolohang

Melemo

• Bakeng sa mefuta e feteletseng ea mocheso o phahameng
•No dynamically loaded O-Ring
• Phello ea ho itlhoekisa
•Short instola bolelele khoneha
• Pumping screw bakeng sa mecha ea phatlalatso ea viscous haholo e fumanehang (ho itšetlehile ka tataiso ea ho potoloha).

Likopo tse khothalelitsoeng

•Indasteri ea tšebetso
•Indasteri ea oli le khase
• Theknoloji ea ho hloekisa
•Indasteri ea peterole
•Indasteri ea lik'hemik'hale
•Indasteri ea pampiri le pampiri
•Mecha ea litaba e chesang
•Mecha ea litaba ea viscous e phahameng haholo
•Lipompo
• Thepa e khethehileng ea ho potoloha

Lisebelisoa tsa Motsoako

RING EA STATIONARY: CAR/ SIC/ TC
ROTARY RING: CAR/ SIC/ TC
TIISO EA BOBELI: GRAQHITE
LIKAROLO TSA KHALE LE TŠEPE: SS/HC
MOSEBETSI OA: AM350

Leqephe la data la WMFWT la boholo (mm)

sdvfd
sdvd

Melemo ea tšepe bellow mechanical litiiso

Metal bellows litiiso li na le melemo e mengata ho feta litiiso tse tloaelehileng tsa pusher. Melemo e hlakileng e kenyelletsa:

- Ha ho na o-ring e matla e felisang monyetla oa ho fanyeha kapa ho roala shaft.

- Mekotla ea tšepe e leka-lekaneng ka metsi e lumella tiiso ho sebetsana le khatello e eketsehileng ntle le mocheso o eketsehileng.

- Ho Itlhoekisa. Matla a Centrifugal a lahlela lintho tse tiileng hole le sefahleho sa tiiso - Moralo oa Trim o lumella ho kenella ka har'a mabokose a tiisitsoeng a tiileng

- Esita le sefahleho loading

- Ha ho Springs ho koala

Hangata, litiiso tsa tšepe li nkoa e le litiiso tse phahameng tsa mocheso. Empa litiiso tsa tšepe tsa bellows hangata li sebetsa mefuteng e mengata ea lits'ebetso tse ling tsa tiiso. E tloaelehileng haholo ho tsena ke lik'hemik'hale, lisebelisoa tsa pompo ea metsi ka kakaretso. Ka lilemo tse ngata mofuta o theko e tlaase oa liqibi tsa tšepe o sebelisoa ka katleho indastering ea metsi a litšila / likhoerekhoere le masimong a temo a pompa metsi a nosetso. Litiiso tsena ka kakaretso li ne li etsoa ka melomo e bopehileng ho e-na le meutloa e cheselitsoeng. Li-welded bellows li-seal li matla haholo 'me li na le litšobotsi tse phahameng tsa ho fetoha le ho hlaphoheloa tse loketseng ho tšoara lifahleho hammoho empa li bitsa chelete e ngata ho li etsa. Welded metal bellows liqibi ha li ratehe haholo ho mokhathala oa tšepe.

Hobane litiiso tsa tšepe li hloka o-ring e le 'ngoe feela,' me hobane o-ring e ka etsoa ka PTFE, litiiso tsa tšepe li na le tharollo e babatsehang ea lik'hemik'hale moo Kalrez, Chemrez, Viton, FKM, Buna, Aflas kapa EPDM e sa lumellaneng. . Ho fapana le tiiso ea ASP Type 9, o-ring e ke ke ea baka ho roala hobane ha e na matla. Ho kenngoa ka PTFE o-ring e tlameha ho etsoa ka tlhokomelo e eketsehileng e lefshoang holim'a boemo ba shaft, leha ho le joalo li-o-rings tse kentsoeng tsa PTFE li fumaneha ka boholo bo bongata ho thusa ho tiisa sefahleho se sa tloaelehang.


  • E fetileng:
  • E 'ngoe: